MK 1050M-II
MK 1050 M-II
High-Precision Automatic Die-Cutting Machine
MK 1050 M-II is a high-speed, precision and automatic die cutter with state of the art design for today's sophisticated folding carton industry. Same as its predecessors, MK 1050 M-II Die Cutter is a result of our philosophy in the manufacturing of printing and converting equipment in the past 30 years, a machine with the highest possible productivity, versatility, multi-function, safety and ease of use.
A: Feeding System
Delicately designed feeder with 3-way lateral blowers smoothly carries paper from feeder pile to die cutting unit. The feeder head angle and suction pressure are adjustable to accommodate various kinds of paper and working speed.
B: Feeder
The feeder is made of lightweight aluminum alloy with hard coat anodizing finish and designed with ease of adjustment to suit various paper stock. There are four detectors are provided to prevent the feeder from damage if the feeder pile accidentally ascends beyond the safety point.
C: Deceleration of Paper Speed at Front Guides
A speed selector is provided to select a lower speed of paper prior to arriving at front guides when running thin paper to prevent it from getting curled or regular speed when work on thick stock.
D: Single-Position Engagement Clutch
This special clutch makes it possible to run the feeding and die cutting units separately in the setup of a new job. When an urgency stop occurs this clutch enable the die cutting unit keep on running at gradually reduced speed so that after the error is corrected and the machine is restarted, the die cutting unit can resume its speed in a very short period of time and the first sheet can be fed to the exact position at die cutting unit. This clutch greatly saves time in the setup of a new job and decrease waste paper.
E: Patented Gripper Bar
Gripper bars are made of lightweight, low inertia, high rigidity and abrasion resistant aluminum alloy with hard coat anodizing finish, featuring consistent and accurate registration in high speed die cutting, embossing and creasing.
F: Micro Adjustment of Cutting Pressure
The cutting pressure is controlled by a motorized worm gear assembly and increased or decreased by simply pressing a button even machine is running. The self-lock nature of worm gear ensures a determined cutting pressure remains constantly throughout the whole job lot.
H: Pneumatic Lock-up of Cutting Chase
Unlike other die cutters on that the lock-up of cutting chase is by means of a cam, MK 1050 M-II has a pneumatic device to lock or release cutting chase simply by switching a rotary switch to ensure the cutting chase is locked firmly to the proper position.
I: Flat Bed
The flat bed on MK 1050 M-II die cutter is designed as a versatile type for die cutting, embossing and creasing purposes. A spring loaded guider block controls the position of flat bed in machine direction. After fastened, this guider block ensures that a flat bed is correctly positioned even after repeated pullout and push-ins. Thanks to this device, the flat bed of MK 1050 M-II die cutter are interchangeable from one machineto another so that customers are benefited by saving the cost of flat bed.
The flat bed and cutting chase on MK 1050 M-II are machined to have excellent flatness and parallelism between them so that the time it requires to pitch a new cutting die is considerably decreased.
J: Overload Protection
MK 1050 M-II die cutter has an unique safety device consists of a toque limiter that stop the gripper bars immediately and discharges the electromagnetic clutch of main motor to emergently stop the machine when an overload occurs due to machine or operator fault. This unique safety device provides the highest safety of equipment as well as operator.
K: Unique Design of Front Guides
MK 1050 M-II die cutter has four front guides. The two in the center are moveable and can be micro adjusted by means of motor assisted worm gear. This professional and unique design provides the best and significant control of paper stock of different sizes, particularly the small sheet of paper.
L: Depressor Brush at Delivery
A depressor brush is used to help unloading paper from gripper bars and place die cut sheets neatly on delivery pile. The position and angle of this brush can be easily adjusted to suit paper stock in different gauges even in production.
High-Precision Automatic Die-Cutting Machine
MK 1050 M-II is a high-speed, precision and automatic die cutter with state of the art design for today's sophisticated folding carton industry. Same as its predecessors, MK 1050 M-II Die Cutter is a result of our philosophy in the manufacturing of printing and converting equipment in the past 30 years, a machine with the highest possible productivity, versatility, multi-function, safety and ease of use.
A: Feeding System
Delicately designed feeder with 3-way lateral blowers smoothly carries paper from feeder pile to die cutting unit. The feeder head angle and suction pressure are adjustable to accommodate various kinds of paper and working speed.
B: Feeder
The feeder is made of lightweight aluminum alloy with hard coat anodizing finish and designed with ease of adjustment to suit various paper stock. There are four detectors are provided to prevent the feeder from damage if the feeder pile accidentally ascends beyond the safety point.
C: Deceleration of Paper Speed at Front Guides
A speed selector is provided to select a lower speed of paper prior to arriving at front guides when running thin paper to prevent it from getting curled or regular speed when work on thick stock.
D: Single-Position Engagement Clutch
This special clutch makes it possible to run the feeding and die cutting units separately in the setup of a new job. When an urgency stop occurs this clutch enable the die cutting unit keep on running at gradually reduced speed so that after the error is corrected and the machine is restarted, the die cutting unit can resume its speed in a very short period of time and the first sheet can be fed to the exact position at die cutting unit. This clutch greatly saves time in the setup of a new job and decrease waste paper.
E: Patented Gripper Bar
Gripper bars are made of lightweight, low inertia, high rigidity and abrasion resistant aluminum alloy with hard coat anodizing finish, featuring consistent and accurate registration in high speed die cutting, embossing and creasing.
F: Micro Adjustment of Cutting Pressure
The cutting pressure is controlled by a motorized worm gear assembly and increased or decreased by simply pressing a button even machine is running. The self-lock nature of worm gear ensures a determined cutting pressure remains constantly throughout the whole job lot.
H: Pneumatic Lock-up of Cutting Chase
Unlike other die cutters on that the lock-up of cutting chase is by means of a cam, MK 1050 M-II has a pneumatic device to lock or release cutting chase simply by switching a rotary switch to ensure the cutting chase is locked firmly to the proper position.
I: Flat Bed
The flat bed on MK 1050 M-II die cutter is designed as a versatile type for die cutting, embossing and creasing purposes. A spring loaded guider block controls the position of flat bed in machine direction. After fastened, this guider block ensures that a flat bed is correctly positioned even after repeated pullout and push-ins. Thanks to this device, the flat bed of MK 1050 M-II die cutter are interchangeable from one machineto another so that customers are benefited by saving the cost of flat bed.
The flat bed and cutting chase on MK 1050 M-II are machined to have excellent flatness and parallelism between them so that the time it requires to pitch a new cutting die is considerably decreased.
J: Overload Protection
MK 1050 M-II die cutter has an unique safety device consists of a toque limiter that stop the gripper bars immediately and discharges the electromagnetic clutch of main motor to emergently stop the machine when an overload occurs due to machine or operator fault. This unique safety device provides the highest safety of equipment as well as operator.
K: Unique Design of Front Guides
MK 1050 M-II die cutter has four front guides. The two in the center are moveable and can be micro adjusted by means of motor assisted worm gear. This professional and unique design provides the best and significant control of paper stock of different sizes, particularly the small sheet of paper.
L: Depressor Brush at Delivery
A depressor brush is used to help unloading paper from gripper bars and place die cut sheets neatly on delivery pile. The position and angle of this brush can be easily adjusted to suit paper stock in different gauges even in production.
The specifications
| Maximum sheet size | 1050mm x 750mm |
| Minimum sheet size | 450mm x 370mm |
| Maximum die cutting size | 1040mm x 740mm |
| Paper standard | 0.1~ 2mm |
| Paper standard (Cardboard) | corrugated board<=4mm |
| Max pressure protect system | 260 T |
| Max. speed (Die cutting) | 7500 sheets/hour |
| Standard stamping accuracy | <= ±0.075mm |
| Rate wattage | 18.6 KW |
| Dimension(L x W x H) | 5437mm x 4050mm x 1950mm |
| Weight | 15 T |
| Air Supply | 0.55~0.7 Mpa,>0.6 cubic m/min |
In the interest of product improvement, we reserve the rightto change specifications and features without notice.