MK 1060M
MK 1060M
AUTOMATIC DIE-CUTTING MACHINE
MKI060 inherits various advantageous structures of MK die cutting machines. Man-machine engineering and industrial exterior design have been kept in mind when the machine was being developed. Mkl060 is CE certified. It's a versatile machine with lots of benefits, e.g. cost-saving, high speed and high efficiency, etc.
AUTOMATIC DIE-CUTTING MACHINE
MKI060 inherits various advantageous structures of MK die cutting machines. Man-machine engineering and industrial exterior design have been kept in mind when the machine was being developed. Mkl060 is CE certified. It's a versatile machine with lots of benefits, e.g. cost-saving, high speed and high efficiency, etc.
-
Feeder
The feeder is made of lightweight aluminum alloy with hard coat anodizing finish and designed with ease of adjustment to suit various paper stock. There are four detectors areprovided to prevent the feeder from damage if the feeder pile accidentlly ascends beyond the safety point. -
Deceleration of Paper Speed at Front Guids
A speed selector is provided to select a lower speed of paper prior to arriving at front guides when running thin paper to prevent it from getting curled or a regular speed when work on thick paper. -
Side Guides
The side guides on MK-l060 were delicately designed to change fremn "pull to push" and viee versa by simply turning a bolt .This is a time-saving feature for job changeover. -
Single-Position Engagement Clutch
This special clutch makes it possible to run the feeding and die cutting units separately in the setup of a new job. When an urgency stop occurs this clutch enables the die cutting unit keep on running at gradually reduced speed so that after the error is corrected and the machine is restarted, the die cutting unit can resume its speed in a very short period of time and the first sheet can be fed to the exact position at die cutting unit. This clutch greatly saves time in the setup of a new job and decrease waste paper. -
Patented Gripper Bar
Gripper bars are made of lightweight, low inertia, high rigidity and abrasion resistant aluminum alloy with hard coat anodizing finish, featuring consistent and accurate registration in high speed die cutting, embossing and creasing. -
Overload Protection
MK 1060 Die Cutter ha§ an unique safety device consists of a torque limiter that stop the gripper bars immediately and disengag~ the electromagnetic clutch of main motor to emergently stop the machine when an overload oecurs due to machine or operator fault. Tllls unique safety device provides the highest safety of equipment as well as operator. - The Delivery
A depressor brush is used to help unloading paper from grippers and place die cut sheets neatly on delivery pi1e. The position and angle of this brush can be easily adjusted to suit paper stock in different gauges even in production.
The specifications
| Maximum sheet size | 1060mm x 760mm |
| Minimum sheet size | 450mm x 370mm |
| Maximum die cutting size | 1045mm x 745mm |
| Paper standard | 90~2000 g/sqm |
| Paper standard | 0.1~ 2mm |
| Paper standard (Cardboard) | corrugated board<=4mm |
| Max pressure protect system | 260 T |
| Max. speed (Die cutting) | 7800 sheets/hour |
| Standard stamping accuracy | <= ±0.075mm |
| Rate wattage | 18.6 KW |
| Dimension(L x W x H) | 5437mm x 4050mm x 1950mm |
| Weight | 15T |
| Air Supply | 0.55~0.7 Mpa,>0.6 cubic m/min |
In the interest of product improvement, we reserve the rightto change specifications and features without notice.